Bushcraft Knife Field Test 2015

During the last year I've executed a bushcraft knife field test comparing 15 different robust knives to each other. The results of this test are shown below and are based upon my personal opinion of each one of the 15 knives after spending time with them by the campfire, out hunting and in the workshop.




Bushcraft
I think it's wonderful how the interest for Bushcraft (Woodcraft, Woodlore, Forest Life) are steady growing all over the world. My definition of Bushcraft is; keeping it simple during outdoor activities like; hiking, canoeing, fishing, hunting or just hanging out by the camp fire. By learning how to make use of what the woods offer and reading the forest's signs I can get the most out of my time spent in the field, and all of this in a sustainable way. Bushcraft is an umbrella name for old and new knowledge how to coexist with nature. Many of these skills were the everyday tasks of our forefathers; whittling, fire, harvest, field cooking and navigating. For me Bushcraft is humble respect towards my surrounding (friends, animals and the environment). Often Survival is mentioned in the same context as Bushcraft as Bushcraft can be a part of Survival and vice versa. Hence the words Survival Knife and Bushcraft Knife.

The Bushcraft Knife
The knife has gotten an almost sacred status among us bushcraft enthusiasts. But I want to under line the fact that you can bushcraft with any knife, or no knife at all for that matter. But even if the knife isn't the most important tool when spending time in the great outdoors; the knife also has gotten to play an important role as a romantic symbol of self sufficiency and adventure. As a result of the increasing bushcraft interest most knife manufactures today offer one or several modern bushcraft knife models. Below I'm trying to summarize the special features find in these new products.
  • A 100 mm long fixed blade
  • Full tang (the blade steel runs all the way through and up the handle)
  • Extra thick knife blade (3-6 mm)
  • Blade made of carbon steel (for easy maintenance and spark throwing)
  • Sharp blade spine edges (for throwing sparks of the ferro rod)
  • Drop point blade (for a robust blade tip)
  • Scandinavian grind edge profile (single bevel V shaped edge for easy maintenance and good wood carving abilities)



To conclude: a robust mid size fixed blade capable of handling fine sloyd as well as wood chopping. The edge should be easy maintained and the spine capable of producing sparks when needed. This is how a modern bushcraft knife often looks like. However I want to point out that knives with less robust specs than this has successfully been used in woods since dawn of mankind. The absolute most important aspect of a knife is the hand and mind holding it.

The Test
When in my thoughts on how the ultimate bushcraft knife looks like I decided to look into my knife collection and pick out the knives somehow matching the above modern bushcraft knife definition. The 15 knives picked out have been my field friends for some time now; whittling, hunting and cooking to compare them to each other. I'm fully aware of that there are many other bushcraft knife models out there on the market, but these 15 was the ones I had at hand when the test started. For instance a number of interesting modern bushcraft knife models were released during my test; Buck Selkirk KnifeESEE Camp-Lore RB-3Helle TemagamiBrusletto RondaneFällkniven F1 Pro and Morakniv Garberg. These models together with older models like; Condor BushloreBen & Lois Orford Woodlander 4"Marttiini Full Tang KnifeGerber Bear Grylls Ultimate Pro and Staaf Knives Bushcraft Evolution I look forward testing in the future.





Inspired by my latest saw test I've chosen to publish my test results by using a number of line up pictures showing the ranking between the 15 knives looking at the features; Blade Length, Blade Thickness and Knife Weight. All measuring are made by myself therefor the numbers can differ from the manufacturer's specs. I hope these line ups can help you in your thoughts regarding these knife models. As I do a lot of whittling with my bushcraft knives I also have judged each knife on how nice I think they are when carving wood. These points together with me judging the knife's three main components; the Blade, the Handle and the Sheath sums up to a total score helping me to find my over all favorite knives among the 15. If you have questions regarding my test method you're welcome to contact me. The 15 test objects are, in alphabetical order.


Blade Length
The below picture show a blade length comparison between the 15 test knives. The shortest blade is on the left and the longest to the right.




From the left:

If you click on each knife model you can read more details about the knife and the manufacturer.


Blade Thickness
This is what it looks like when i line up the test knives according to the thickness of their blades. Thin blade to the left and thick blade to the right.




From the left:
2,8 mm, Buck 679 BuckLite MAX Large Knife


Knife Weight
Here you have the lightest test knife to the left and the heaviest to the right. The sheaths are not included when weighing.




From the left:


The Price
The variation in price among these 15 test knives stretches between 199 SEK and up to 3500 SEK (purchase price in Sweden). Even if I try to ignore the price tags while testing the capability, comfort and design of the knives I can mention the tree most expensive and the tree cheapest. The three highest priced knives among the 15 are; the Spyderco Bushcraft, the Benchmade Bushcrafter and the Karesuandokniven Willow Gouse. The three low priced are; the Morakniv Bushcraft, the Morakniv Companion and the Kayoba Knife 770180. You can find more price info by clicking on each knife model link in the text.

The Summary
It's almost an impossible task picking out just one ultimate bushcraft knife as it all depends on what task I'm doing with the tool (fine carving, chopping, hunting, fishing, cooking). Adding to this also all the peronal preferences of each and one of us happy bushcraft junkies. Personally I almoust never batoon with my knife. Instead I let my axe do the chopping. Therefore I often find myself bringing smaller thin bladed knives not using full tang into the woods. Some nice exampels of "weaker " knife models that also manage most bushcraft tasks are; the Classic 2/0, the Classic Original1, the Craftline HighQ, the Basic 511, the Giron and the Pendleton Lite Hunter. I really liked all these 15 test knives. None of them disappointed me so much I wouldn't take them back out there again. But when I summarize all of my testing the final and total ranking looks like this, with the test winner to the left.




From the left:
By clicking on each knife model you can read all my motivations as well as more details about the knife and the manufacturer. I deeply recommend you to read about all the knives to get the most out of this tests analysis.


Top 5
Here you have some shorts comments about the knives placed among the top five.



  1. Karesuandokniven Willow Grouse 3524
  2. Karesuandokniven Survival Knife 3586
  3. Casström No.10 Swedish Forest Knife
  4. Morakniv Companion HD
  5. Fällkniven F1

The Willow Grouse 3524 gets the highest total score when looking at best blade, best handle, and best sheath. Also the whittling capability of this knife is very good. And as a bonus the down to earth and warm design of this knife makes my bushcraft heart beat lively.

Survival Knife 3586 share many of the highlights of the Willow Grouse 3524. But the somewhat wider blade and the not so cylindrical handle brings down the total score a bit.

Casström No.10 has one of the most typical modern bushcraft knife design. t's a really sturdy knife offering an interesting handle and sheath design (see the Dangler). However the thickness of the blade is a bit too much for my taste, therefore a No.10 ends up in a strong 3rd place.

The Companion HD has an amazing blade for whittling. However personally I think the HD's thicker handle belly is a bit too fat. But this strong light weight low prized knife is fantastic bushcraft knife. To be honest I thought the Companion HD would end up on top in my test but in the end the waist measure together with the plastic sheath brought down the total score.

The F1:an's impressive balance and premium grip manage to charm the scandi grind lover inside of me. The F1's convex grind edge deliver an outstanding sharpness and endurance. Adding to this; Fällkniven's nice leather work, result in a strong 5th place.

As the smoke lightens and the test is over I get the nice surprice of seeing that the top five contenders are all Swedish products. I'd like to see this as an indication that we Swedes should be very proud of our nordic way of living, especially in this bushcraft boom era. The fact that all the test knives using a scandi grind edge placed themselves in the top is a good indication of my love for this practical edge profile when it comes to bushcrafting. However I have to say that none of the 15 knives made me so disappointed I'd never will use it again. And even if the test's real fat boy; the Schrade Frontier SCHF36 didn't get the test's highest score I want to lift my hat of to the SCHF36's unexpected pleasant balance. Another surprise was the high score of the low price knife Kayoba Knife 770180.




It's been a pleasure and an adventure comparing all these knives in the same field test. Of course I've learned a lot about each knife, but what I cherish most is the fact that I've gotten a bit further in my philosophical thoughts about what I want in a knife. I hope you have found these test results and knife posts interesting and inspiring. Please let me know if you have any feedback or if you just want to talk about your favorite bushcraft knife. I hope seeing you at the Bushcraftfestivalen 2016 August 12th-14th in Gottröra Sweden. Then we also can sit down by the camp fire and discuss our beloved edge tools.

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Karesuandokniven Willow Grouse 3524

The knife manufacturer Karesuandokniven has been producing knives now for about 40 years way up in the Swedish North. As an adventurous teenager I got my first blades from Karesuandokniven; it was the Moose Special 3507 followed by this Willow Grouse 3524. The knives has performed really good thought the years and since then I've also had the pleasure of getting acquainted with a number of different knife models from the manufacturer. To see more reviews on Karesuandokniven; click HERE. During last year I executed a field test focusing on bushcraft activities. In the Bushcraft Knife Field Test 2015; 15 different robust knifes are compared to each other. You can see the test by clicking HERE. Two of my Karesuando knives enlisted for this test and both did real good; the Willow Grouse 3524 ended up at first place and the Survival Knife 3587 in second place. Let's take a closer look at the Willow Grouse, also called Ripan in Swedish.





The Willow Grouse
The 3,2 mm thick and 102 mm long stainless steel blade made of Sandvik 12C27 has a "mora knife like" shape making it a joy to work with. Back in 1993 when I bought this knife the out of the box sharpness wasn't the best, but after some care it has been performing well. When I compare the older knives to the newer; Karesuandokniven's quality regarding the edge has gotten much better. The spine of the blade has a comfortable rounded shape for carving. But if you like to use the spine on your Ferro rod you can always flatten an area of the spine with your sharpening tool (as seen on the Survival Knife 3587). The knife has a long tang surrounded by Birch, Rein Deer Stag and Brass and the handle offers a very comfortable cylinder shaped grip including a discreet finger guard. As you can see the shape of the back of the handle is inspired by the shape of the Willow Grouse. The leather sheath is fitted with a plastic inlay and offers a good fit for the knife. The classic design of the sheath enables carrying the knife dangling below the belt. The Ripan is also available in a more exclusive version using a blade delivered from the Swedish forge Damasteel in Söderfors.





A Laid Back Winner
Swedish craftsmanship combining; Swedish steel, wood, stag and leather in a comfortable fixed blade knife featuring a Scandi Grind edge is according to me a unbeatable package when it comes to practicality and beauty. Willow Grouse 3524 almost got the highest score in my bushcraft knife test regarding the four categories; Blade, Handle, Sheath and Carving. I say "almost" as the Morakniv Companion Heavy Duty got one more point to its blade compared to the Willow Grouse 3524. Lately Karesuandokniven has adjusted their price tags; now offering their knives at a higher price. But I think that is fair when looking to the quality you get for the money. I really don't have anything bad to say regarding the Kresuandokniven Willow Grouse 3524, other than I usually choose a bit smaller blade for my EDC use when out in the woods, like for instance the smaller sibling Karesuandokniven Giron 3537. Nice to see that my old knife from the early 90's won the Bushcrat Knife Field Test 2015. But even greater is the fact that top 5 in this test were all Swedish knives. As I mentioned; check out the test and please feel free sending me you feedback. The Karesuandokniven Willow Grouse 3524 is a laid back winner delivering a clean, casual and competent cut to the Woodsman. the Willow Grouse is my pick when in times I need a more sturdier knife for bushcrafting.





Specs
Manufacturer: Karesuandokniven AB, with production in Sweden
Model: Willow Grouse 3524 (Ripan 3524)
Blade material: Stainless Sandvik steel 12C27 with HRC 57
Blade length: 102 mm
Blade thickness: 3,2 mm
Blade width: 21 mm
Edge profile: Scandi Grind with a 22° angle
Knife length: 215 mm
Handle material: Birch wood, Rain Deer Stag and Brass
Handle thickness: 23 mm
Sheath: Cow leather
Knife weight: 118 g
Total weight (knife and sheath): 178 g
Price: 1865 SEK (Sweden 2016)

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Casström No.10 Swedish Forest Knife

During the last year I executed a field test focusing on bushcraft activities. In the Bushcraft Knife Field Test 2015; 15 different robust knifes are compared to each other. You can see the test by clicking HERE. One of the contenders was the Casström No.10 Swedish Forest Knife, which we now shall take a closer look at.





History
Mr. David Cassini Bäckström is a 3rd generation trading entrepreneur in the beautiful Lapland of the northern part of Sweden. David started the company Casström AB together with his wife back in 2007. The company offer outdoor products and from the start they focused on other manufacturer's knives. But after David recognized a growing demand for a pure bushcraft knife he decided to produce one of their own. The first version of the Swedish Forest Knife was launched in the Autumn of 2012. This knife differs from today's version. Initially the Swedish Forest Knife had a shorter handle and a bigger finger guard. After listening to the customer's feedback Casström in 2014 updated the design with a longer and sturdier handle and a more practical sheath. Casström AB are still offering other knife brands together with their own and today the company staff of about 10 persons is based in Sweden and in the UK.





Design 
The Swedish Forest Knife is today offered i two different sizes and in a range of different combinations of; steel, edge profile and handle material. You can also get a stripped blade for making your own knife. The leather sheath is offered for both left and right handed carry and with or without a ferro rod holder. Also a additional belt loop called the Dangler is offered for low carrying. My knife has a 97 mm long  and 3,7 mm thick blade made of the carbon steel Böhler K720 with a hardness of 58-60 HRC. The full tang spear point shaped blade has a Scandinavian grind with a 24° angle. The spine of the blade has sharp edges if you like to use the knife on your ferro rod. The oak scales and the black plastic liners are hold in place by glue and three brass rivets. The knife is delivered with a well made 3 mm thick cow leather sheath. No insert is used and a drainage hole is to be found at the tip of the sheath. A nice thing about this sheath is that it actually fits several of my other knives.





A Name that Commits
No.10 is a very good representative of the modern definition of a bushcraft knife. The clean and down to earth design is well merged with this tool's toughness and functionality. Although the blade is almost 4 mm thick I think that the balance and edge profile of the blade makes the knife a pretty good wood carver. The No.10 is delivered with a nice sharpness but after some additional edge care the edge cuts even better. The balance and roughness of this knife makes it one of the few Scandi grind blades I feel comfortable chopping with. The Swedish Forest knife No.10 weights 179 g and a thick blade like this can withstand most abuse. But I never recommend using a knife as a pray bar, a knife is made for cutting and slicing. My hands like the No.10's somewhat special handle shape enabling different practical carving grips. With the proper care this prize worthy knife provides a robust and more than life long forest friend. But what could one not to expect from a knife named the Swedish Forest Knife. The knife also did very well in my Bushcraft Knife Field Test 2015. The knife ended up at 3rd place among 14 impressive knives.

Specs  
Manufacturer: Casström AB, Swedish company based in Lycksele 
Model: No.10 Swedish Forest Knife, Scandi, 13101 
Blade material: Carbon steel K720 from Böhler, 58-60 HRC 
Blade length: 97 mm 
Blade thickness: 3,7 mm 
Blade width: 26,6 mm 
Edge profile: Scandi grind with a 24° angle
Knife length: 220 mm 
Handle material: Oak scales and plastic liners
Handle thickness: 22,8 mm  
Sheath: 3 mm thick cow leather  
Knife weight: 179 g 
Total weight (knife and sheath): 249 g 
Price: 795 SEK (Sweden 2015)

If you wanna see more about the Casström No.10; check out the mag article I wrote on the knife in issue No.3 - 2015 of Vapentidningen.

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Morakniv Companion Heavy Duty

During the last year I've executed a field test focusing on bushcraft activities. In the Bushcraft Knife Test 2015; 15 different robust knifes are compared to each other. You can see the test by clicking HERE. One of the test's contenders was the Morakniv Companion Heavy Duty MG, which we now shall look a bit closer at. If you'd like to read more about the Morakniv history I'd like to recommend you to take a look at one of my earlier magazine articles by clicking HERE.




The Companion Heavy Duty
Around 2010 the Morakniv Clipper was a big hit among the world's bushcraft enthusiasts. The legasy of the Clipper then lived on in the Craftline and the Companion with somewhat more sturdy specs. The knives got along very well both with craftsmen and outdoor people. However the bit more rougher bushcraft audience brought out the big cake once the more robust Companion Heavy Duty was launched. The biggest differences within the Clipper/Craftline/Companion lineup is the blade thickness and the shape of the tang. The Clipper had a 2 mm thick blade with a short tang. Craftline HighQ and TopQ festured a 2 mm thick blade with a long tang. The Companion uses a 2,5 mm thick blade together with a long tang of an updated shape. The blade of the Companion Heavy Duty is 3,2 mm thick and the edge has a 4° wider angle (27° instead of 23°). Also the handle of the Heavy Duty was beefed up. The 100 mm long carbon steel blade was made a bit tougher by applying the logo on the side of the blade using etching instead of punching. This to eliminate the risk of fracture indication. Besides the Military Green (MG) the knife also comes in orange. All knives in the Clipper/Craftline/Companion lineup uses the same plastic sheath, just different colors.



Top down; Clipper 840, Craftline HighQ Allround, Companion and Companion Heavy Duty.






Well Fed Handyman
I like the Clipper/Craftline/Companion family for their versatility. Great knives for the workshop, in the car, in the woods and when out hunting. During my bushcraft knife test I was truly impressed with the blade of the Companion Heavy Duty. To be honest I thought this knife would place it self higher in the total score of the test, but the sheath together with the, in my opinion too fat, belly of the handle lowered the score somewhat. Therefore the Companion Heavy Duty ended up at a strong 4th place compared to the other 14 knives. I prefer the more slimmer handle of the regular Companion and the plastic sheath, as practical as it is, had a tough time competing with the beautiful leather works of the competitors. I can truly recommend the Companion Heavy Duty to anyone looking for a price worthy roughneck forest knife with great whittling abilities.

Other post I've published about Morakniv's products; you can find by clicking HERE.




Specs
Manufacturer: Morakniv AB, production in Mora Dalarna Sweden
Model: Companion Heavy Duty MG
Blade material: Carbon steel C100, 58-60 HRC
Blade length: 100 mm
Blade thickness: 3,2 mm
Blade width: 20,5 mm
Edge profile: Scandi Grind with a 27° angle
Handle material: Green plastic and black rubber
Handle thickness: 21,1 mm
Sheath: Green plastic
Knife length: 225 mm
Knife weight: 102 g
Total weight (knife and sheath): 135 g
Price: 234 SEK (Sweden 2014)

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Morakniv Bushcraft Black

During the last year I executed a field test focusing on bushcraft activities. In the Bushcraft Knife Field Test 2015; 15 different robust knifes are compared to each other. You can see the test by clicking HERE. One of the test's contenders was the Morakniv Bushcraft Black, which we now shall take a closer look at.




The History of Morakniv 
The history of the mora knife goes back to the iron age and the era of the Vikings. Archaeological findings indicates processing of iron in the area of Ovansiljan around this time. Since then the craftsmanship and skills of the tool smiths has been carried on from generation to generation. The knife culture grow strong around the village of Östnor in Mora Dalarna Sweden. Here Frost-Erik Ernström founded the Frost Knife Factory in 1891. This got to be the foundation of what we today know as Morakniv AB. Around that time several manufacturers in the area produced mora knives. In 1912 Eriksson & Mattsson's Knife Factory was founded by Krång-Johan Eriksson and Lok-Anders Mattsson. This company later turned into the brand KJ Eriksson AB. By the 1920's the handle of the popular mora knife got it's red color and during the second half of the 1900's plastic revolutionized the industries enabling new design possibilities. As a result of this we also got the well known mora knives of the 80's using rubber and plastic in the handles. In 2005 KJ Eriksson and Frosts Knivfabrik merged and created the brand Mora of Sweden. Today the company offer cutting products via the two brands; Morakniv and Frosts where Morakniv is handling crafting tools and outdoor products and Frosts deliver tools designed for the food industry. Before the longed for modern bushcraft knife could see the day of light in Dalarna the company's R&D department had their hands full testing different concepts, partners and prototypes. And finally around year 2009 the curius bushcraft audience could put their hands on a Mora Bushcraft. Then after a couple of design adjustments the Bushcraft Black as we know it today was ready. By 2014 the eaven bigger Morakniv Pathfinder was launched together with the Morakniv Tactical. These models added the MOLLE feature to the sheaths. This year (2016) Morakniv celibates their 125th anniversary by changing their company name into Morakniv AB and some new product launches.




Bushcraft Black and Orange in the Forest
Bushcraft BlackBushcraft Survival BlackTactical and Bushcraft Survival Orange are the base of the Bushcraft lineup. These knives are meant as a more robust complement to the so popular Companion series. The four mentioned products are basically the same knife except for Orange using a stainless steel blade and the optional serrated edge (SRT) of the Tactical and Black. And the modular concept plastic sheaths are different equipped pending on knife model (sharpener, ferro rod or MOLLE). As the sheath base structure are the same you can mix the Bushcraft knives and sheaths, including the knife model Morakniv Bushcraft Forest.



Top down; Pathfinder, Bushcraft Black, Bushcraft Survival Orange and Bushcraft Forest. The MOLLE vest in the pic comes from Snigel Design.


Bulky yet Slick
Bushcraft Black feature an impressive 3,2 mm thick and 109 mm long black C100 carbon blade coated with DLC (Diamond Like Carbon). Both the DLC and the 4° wider edge angle are very durable on this knife (most mora knives feature a 23° edge angle). If you look closely on the factory edge you can see a micro edge. But without problem I've been treating this Bushcraft Black as any Scandi Grind edge when sharpening. Compared to the Morakniv Classic series; of course the Bushcraft Black feels very bulky. But I still think the Bushcraft Black manage pretty well when doing finer whittling. To spare your left thumb when carving I can recommend you to round the sharp 90 degree spine on the front part of the blade.




When taking care of the game while hunting; the plastic sheath is easy to clean. Also the rubber handle offer a perfect grip even when wet and bloody. I know there are some voices complaining over these knives not feature a full tang. But I've never had any strength lacking problems during my usage. But soon the full tang fans will be able to enjoy the Morakniv Garberg evalible this Spring (2016). Some call the Garberg Morakniv's first full tang, but in my eyes Garberg is Morakniv's third full tang model launched. The old hunting models Morakniv Forest Lapplander 90 and Morakniv Forest Lapplander 95 has been using their full tangs for some time now. I'm really looking forward testing the Garberg soon, together with his siblings Kansbol and Eldris.




I think Morakniv has done a great job expanding their product lineup by adding these sturdy knives. The Bushcraft Black is a very nice roughneck, but I'm also very grateful Morakniv still produces their fantastic Classic series. The Bushcraft Black ended up at a 6th place in my bushcraft knife field test. The reason for it not getting a higher score was the, in my opinion, too asymmetric handle.

If you wanna read more about the Morakniv Tactical and the Morakniv Pathfinder; take a look at the mag article I wrote for Vapentidningen in 2015.
More about the mora knife history you can find in one of my mag articles inside Sweden's oldest magazine; Svensk Jakt.
Other posts on Morakniven can be seen HERE.

Specs
Manufacturer: Morakniv AB, Swedish company with production in Mora Dalarna
Model: Bushcraft Black
Blade material: Carbon steel C100, 58-60 HRC
Blade length: 109 mm
Blade thickness: 3,2 mm
Blade width: 23,1 mm
Edge profile: Scandi Grind with a 27° angle
Handle material: Plastic and rubber
Handle thickness: 22,2 mm
Total knife length: 235 mm
Knife weight: 123 g
Total weight (knife and sheath): 162 g
Price: 350 SEK (Sweden 2014)

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Spyderco FB26 Bushcraft

During the last year I've conducted a bushcraft knife field test comparing 15 different robust knives. You can see the test by clicking HERE. One of the contenders was the Spyderco FB26 Bushcraft,




Spyderco's History
I'd say that Spyderco's history is somewhat of a American dream. It all started back in the mid 70's in California when Sal Glesser and his wife was looking for jobs. After a while they decided to take their faith in their own hands and start their own business. Sal's inventiveness generated The Portable Hand; a workshop tool fixating objects during processing. As the tool resembles a spider; the Glesser's named their company; Spyderco and created a spider like logo. They went all in with their company and lived in a van that worked as the couple's home and office on wheels. The dedicated knife collector Sal soon invented the sharpening system Tri-Angle Sharpmaker; a portable sharpener using ceramic rods to enable a consistent bevel angle when sharpening. In 1981 Spyderco launched their first knife; the model C01 Worker. This original knife featured all the characteristics that today's Spyderco folders have. The Spyderco C01 Worker offered for the first time an one hand opened folder using a hole instead of a thumb stud. Also the belt clip was new to the business. Since then Spyderco has delivered over 200 different knife models and has gotten established as one of the best known folding knife manufacturers in the world. Besides the fact that the Glesser family themselves are excellent knife designers, co operations with different premium knife designers is one of Spydercos characteristics. Knife makers like; Bob Terzuola, Al Mar, Ken Onion, Blackie Collins, Wayne Goddard, Bill Moran and Frank Centofante  have all contributed to a number of classic models in the Spyderco portfolio. It's a fascinating journey the Glesser family have done; going form unemployed to a successful global company. Since 1997 Spyerco has their head office in Colorado and the son Eric Glesser has started to shoulder the proud history of the company together with the about 150 coworkers.





The FB26GP Bushcraft
Most of us probably think of folders when we hear the name Spyderco. But today the company also offer a wide range of fixed blades. One of the more resent models is the FB26GP Bushcraft. The model is developed in cooperation with Chris Claycomb and Bushcraft UK. The knife has all the characteristic features defining a modern bushcraft knife; a carbon steel blade (0-1) using a drop point shape and a Scandi grind (25° angle) and a sharp blade spine. The 3,6 mm thick full tang is surrounded by G-10 scales fixated by brass rivets creating a very meaty and comfortable handle. The knife's center of gravity is located pretty far back in the shiny and nicely shaped handle. The knife is a very nice wood caver but my helping left thumb gets a bit soar from the very sharp blade spine at the blade tip. Also a unnecessary sharp edge could be found on my knife at the discreet finger guard. But both these hot spots was easily removed using a peace of grinding belt. The black premium leather sheath is made of 3 mm thick leather and nice craftsmanship. The six sheath rivets enables a number of interesting attachment possibilities.





Exclusive and Robust Forest Knife
Spyderco Bushcraft ended up in 7th place in my bushcraft knife field test. I love the edge of this knife but the total weight and balance caused loss in the total score. The FB26 is a very luxurious and robust forest knife that delivers an impressive edge straight out of the box. The knife weight of 227 g makes the FB26 the second heaviest knife in my test. The voluptuous handle fits big hands and gloves very well. If you prefer stainless steel and a full flat grind; I recommend you to take a look at the younger sibling Spyderco FB36 Proficient.




Specs
Manufcurer: Spyderco Inc, American company with production in China
Model: FB26GP Bushcraft
Blade material: Carbon tool steel 0-1, about 61 HRC
Blade length: 105 mm
Blade thickness: 3,6 mm
Blade width: 27,5 mm
Edge profile: Scandi grind with a 25°  angle
Knife length: 223 mm
Handle material: Black G-10, polished epoxy laminated fiber glass weave
Handle thickness: 25,5 mm
Sheath: Black 3 mm thick leather
Knife weight: 227 g
Total weight (knife and sheath): 324 g
Price: 3500 SEK (Sweden 2015)
Dealer: Spyderco Sverige

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft and Survival,

Kayoba Knife 770180

During the last year I've conducted a bushcraft knife field test comparing 15 different knifes. You can see the test by clicking HERE. One of the test objects was the Kayoba 7700180.




The Knife 770180
The design of the 770180 is very strongly influenced by the Böker Pathfinder. A stainless steel hollow grind drop point blade fixed in a dark colored wooden handle with brass details. The handle bellow has distinct finger grooves offering a secure but inflexible grip. By inflexible I mean that the finger grooves doesn't invite for backhand and other alternative grips. But the fact that the handle although is pretty straight and long makes the knife OK to handle. As always the sheath is compromised on a budget knife. The sheath made of artificial leather has a classic american hunting knife design.





Capable Low Price Knife
A bit surprising this budget product knife placed it self in a pretty good 9th place in my field test. The knife is delivered with a sad edge but after sharpening and maintaining the edge the knife gets pretty nice. It's the overall design of the knife that leads to this score result in the test. The long handle fits my hand in a decent way. So if you don't mind having to sharpen the knife often and the unsexy fake leather sheath; I think the Kayoba 770180 is worth testing. You get a decent beginners bushcraft knife in this 199 SEK knife.




Specs
Manufacturer: Kayoba, delivering products to the Jula store
Model: Knife 770180
Blade material: Stainless steel
Blade length: 119 mm
Blade thickness: 3,4 mm
Blade width: 27,2 mm
Edge profile: Hollow grind with a primary bevel angle of 34°
Knife length: 231 mm
Handle material: Wood and bras
Handle thickness: 21,6 mm
Sheath: Black artificial leather
Knife weight: 155 g
Total weight (knife and sheath): 196 g
Price: 199 SEK (Sweden 2015)

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in Bushcraft - Survival - Jägarexamen and Motorsågskörkort.


På Svenska

Øyo Nordic Hunting Knife

During the past year I've conducted a bushcraft knife field test comparing 15 different sturdy knives. You can see the test by clicking HERE. One of the contenders was the Øyo Nordic Hunting Knife.




The Norwegian family business Øyo was founded back in 1882 and are still going strong by offering cutlery and edge tools. In Sweden you find many of their products at the outdoor and sports store XXL.

The Øyo Nordic Hunting Knife
This is a robust and slim knife offered together with a black leather sheath. The 119 mm long and 3,9 mm thick drop point blade is made of stainless 440 steel. The short handle consists of a full tang, roughly textured composite scales and two tubular rivets. The three holes in the handle could be used when experimenting with different lanyard and other para cord applications for securing and fixating the knife. Although the sheath isn't a premium one; it gets the job done nicely with it's secure fit and drainage hole.





A Hunting Knife With a Nice Bushcraft Look
Øyo Nordic Hunting Knife is a good looking and nicely performing hunting knife at a reasonable price. Compared to my test's other 14 knives the Øyo Nordic Hunting Knife ended up at a 10th place. The nice blade gave good points but the short handle still kept the total points low in the test.




Specs
Manufacturer: Brødrene Øyo AS in Geilo Norway
Model: Nordic Hunting Knife
Blade material: Stainless 440 steel
Blade length: 119 mm
Blade thickness: 3,9 mm
Blade width: 27 mm
Edge profile: Hollow Grind with a primary bevel angle of 34°
Handle material: Composite
Handle thickness: 21,3 mm
Sheath: Black leather
Total knife length: 228 mm
Knife weight: 183 g
Total weight (knife and sheath): 230 g
Price: 599 SEK (Sweden 2015)

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in  Bushcraft - Survival - Jägarexamen and Motorsågskörkort.

ESEE Knives ESEE-4

During the past year I've conducted a bushcraft knife field test comparing 15 different robust medium sized knives. You can see the test by clicking HERE. One of the contender was the ESEE Knives ESEE-4.




History 
The American company Randall's Adventure & Training (RAT) was founded in 1997 and since then the company have educated profesionals and civilians in the art of jungle survival. The owners Mike Perrin and Jeff Randall has big experience from spending time in jungles like the ones in Central and South America. RAT’s first knife model was the 40 centimeters long RTAK initially developed together with Newt Livesay at the company Wicked Knife Company. The RTAK was a success and to be able to meet the customers requests RAT moved the production over to the Ontario Knife Company (OKC) in 2002. OKC also helped out in developing new knife models but in 2007 the cooperation was ended and Mike and Jeff decided to take care of the production themselves by starting the company RAT Cutlery, today known as ESEE Knives. OKC still produce a RAT series but these knives shouldn't be mistaken for ESEE Knives.Today ESEE Knives offer a wide range of knife models; from folders to big machetes and most products are produced at Rowen Manufacturing in Idaho Falls, Idaho. The main users of ESEE products are military and police but lately more and more hunters, bushcrafters and hikers are starting to pick up these knives.

The ESEE-4
The clean and robust design of the ESEE-4 consist of a wide carbon 1095 blade laser cut from a single piece of steel hardened to 57 RC. The protecting black powder coating gives a rough structure to the 117 mm long drop point blade. The micarta scales and the red liners are mounted by hand and the secured with Loctite. The ESEE-4 is also available in stainless steel, partly serrated and in different colors. The plain edge use a full flat grind edge profile. A nice feature with ESEE Knives is the unique serial number found on every knife. The carrying system consist of a molded plastic (Ambidextrous Molded Polypropylene) sheath that together with the extra kit offer a very flexible system, including MOLLE. The knife locks in nicely in the sheath and the system offer easily accessibility.




Top down; ESEE-4, ESEE-3 and ESEE Izula II


A Rough and Tactical Knife With Bushcraft in the Pipe 
My definition of Bushcraft includes a big portion of wood carving. With this in mind the flat handle of the ESEE-4 results in a 11th place in my bushcraft knife field test. However at this moment ESEE is launching alternative scales to the ESEE-3 and ESEE-4. These new scales are influenced by the new bushcraft knife series ESEE Knives call Camp-Lore. These interesting new products are a good sign of ESEE listening to the growing bushcraft audience's love for whittling friendly shaped handles and leather sheaths. I'm looking forward getting the opportunity to test these new products, especially the Camp-Lore-modellen RB3. If you want to modify your old ESEE one way is to imitate the original feature of the ESEE-5; a bow drill divot in the handle. If you remove one of the screws in the handle you get a divot. If you also make the scale hole bigger you enable the bow drill spindle to rotate freely only countering the low friction of the tang steel. However; mind keeping the sheath on the blade while using your knife as a spindle socket to avoid injuries. I like the ESEE-4's carbon steel and the look of the knife. Another nice feature is the life time warranty ESEE offers.




Specs
Manufacturer: ESEE Knives, design by Randall's Adventure & Training (RAT) and production by Rowen Manufacturing, Idaho, USA
Model: ESEE-4P
Blade material: 1095 carbon steel, 55-57 RC. Also available in stainless 440C steel
Blade length: 117 mm (tip to scale)
Blade thickness: 5 mm
Blade width: 31,5 mm
Edge profile: Full Flat Grind with a primary bevel of 40°
Handle material: Canvas micarta
Handle thickness: 14,4 mm
Knife length: 227 mm
Sheath: Plastic, Ambidextrous Molded Polypropylene
Knife weight: 211 g
Total weight (knife and sheath): 263 g
Price: 1552 SEK (Sweden 2014)

To see more about ESEE Knives and their model Izula II; I can recommend you to read my magazine article inside Vapentidningen nr. 9 - 2015.

Welcome to Jonas Vildmark Bushcraftcenter, we offer classes in  Bushcraft - Survival - Jägarexamen and Motorsågskörkort.